Wutar Wutar Lantarki
Aikace-aikace
(1) Soso kumfa: soso, kumfa, kumfa slotting, EPS, EVA, lu'u-lu'u auduga, kumfa kushin da sauransu.
(2) roba roba: roba, roba, roba bude, acrylic sabon, benzene hukumar sabon, KT jirgin, talla zane, kafet, PVC bututu, kowane irin filastik takardar, nailan bututu, filastik bututu, na USB da sauransu.
(3) Cable: roba masana'anta, na USB, braided bel, ton jakar, PVC igiya, nailan igiya, shiryawa bel, raga masana'anta, da dai sauransu
(4) Cloth fata category: Tufafi, wanda ba saka zane, labule zane, zane, nailan zane, ruwa mai hana ruwa, fata, kafet da sauransu.
(5) Sauran nau'ikan: abin toshe kwalaba, tsabtace datti, fim ɗin aluminum
Matakan kariya
Siga
Da fatan za a tabbatar da cewa an kashe injin kuma an cire shi
kafin a kwance na'urar walda don kada ta kasance
rauni ta hanyar wayoyi masu rai ko abubuwan da ke cikin injin.
Na'urar waldawa tana haifar da babban zafin jiki da girma
zafi, wanda zai iya haifar da wuta ko fashewa idan aka yi amfani da shi ba daidai ba,
musamman idan yana kusa da kayan konewa ko iskar gas mai fashewa.
Don Allah kar a taɓa bututun iska da bututun ƙarfe (lokacin aikin walda ko
lokacin da injin walda bai yi sanyi gaba ɗaya ba),
kuma kar a fuskanci bututun ruwa don gujewa konewa.
Dole ne ƙarfin wutar lantarki ya dace da ƙimar ƙarfin lantarki
alama akan injin walda kuma a dogara da ƙasa. Haɗa
na'urar waldawa zuwa soket tare da jagoran ƙasa mai karewa.
Domin tabbatar da amincin masu aiki da abin dogaro
aiki na kayan aiki, wutar lantarki a wurin ginin
dole ne a sanye da tsarin samar da wutar lantarki da kariyar zubar da ruwa.
Dole ne a yi aiki da injin walda a ƙarƙashin ingantacciyar kulawar
ma'aikaci, in ba haka ba yana iya haifar da konewa ko fashewa saboda
high zafin jiki.
An haramta sosai don amfani da injin walda a cikin ruwa ko laka
ƙasa, guje wa jiƙa, ruwan sama ko damshi.
| Samfura | LH8100 | LH8150 |
| Ƙimar Wutar Lantarki | 230V / 120V | 230V / 120V |
| Yawanci | 50/60 Hz | 50/60 Hz |
| Ƙarfi | 100W | 150W |
| Tsarin Zazzabi |
daidaitacce | daidaitacce |
| Wuta Zazzabi | 50-600 ° C | 50-600 ° C |
| Tsawon Waya Wuta | 3 m | 3 m |
| Girman samfur | 24 x 4.5 x 3.5 cm | 24 x 4.5 x 3.5 cm |
| Girman Kunshin | 28 x 23 x 8 cm | 28 x 23 x 8 cm |
| Cikakken nauyi | 395g ku | 395g ku |
| Samfura | LH8200 | LH8250 |
| Ƙimar Wutar Lantarki | 230V / 120V | 230V / 120V |
| Yawanci | 50/60 Hz | 50/60 Hz |
| Ƙarfi | 100W | 150W |
| Tsarin Zazzabi |
daidaitacce | daidaitacce |
| Wuta Zazzabi | 50-600 ° C | 50-600 ° C |
| Tsawon Waya Wuta | 3 m | 3 m |
| Girman samfur | 24 x 4.5 x 3.5 cm | 24 x 4.5 x 3.5 cm |
| Girman Kunshin | 28 x 23 x 8 cm | 28 x 23 x 8 cm |
| Cikakken nauyi | 395g ku | 395g ku |
Babban Sassan
1.Blade 2.Blade Holder 3.Auxiliary Dutsen
4.Maballin zafin jiki 5.Mai nuna haske 6.Kunna kunnawa/kashe
7.Power Waya
Aiki
1. Kunna wuta.
2. Daidaita maɓallin zafin jiki, mafi girman zafin jiki idan an juya ciki kuma rage yawan zafin jiki tare da juyawa waje.
3. Danna maɓallin zafin jiki kuma sanya ruwan wukake akan abu. Kunna shi kuma dumama na daƙiƙa. An ba da shawarar gwada yanke kayan sharar gida kafin yanke. 4. A cikin aiwatar da amfani, lokacin da ruwan wukake ya kai ga yankan zafin jiki, maɓallin tsaka-tsakin tsaka-tsaki don kula da daidaiton zafin jiki da sauri, inganta aikin aiki, tsawaita rayuwar sabis.
5. Hankali: ana bada shawara don kiyaye yanayin zafin jiki ta hanyar sakewa da sakewa da wutar lantarki bayan minti 10-15 na ci gaba da dumama don hana zafi da lalacewa ga Cutter Hot Hot.
Shigar da Ruwa
1. Lokacin da kayan aiki ya yi sanyi kuma ba a sami kuzari ba, cire ƙwayayen biyu suna manne ƙafar wuka tare da maƙarƙashiya hexagonal a jujjuyawar agogo.
2. Saka kafafu biyu na ruwan wuka a cikin ramukan yankan kawunan guda biyu sannan a matsar da goro biyu don tabbatar da kafafun wuka da yanke kawunan gaba daya. Haɗin da ba daidai ba ba zai yi zafi da ruwa ba.
Cire Ruwa
Bayan amfani da lokaci, ragowar kayan na iya makale akan ruwan, da fatan za a yi amfani da goshin waya don tsaftacewa.
Jerin kaya
Jiki
Ƙananan spanner
Buga waya
Kit ɗin kayan aiki
"R" Shape Blade (LH8100)
15cm Madaidaicin Ruwa (LH8150)
20cm Madaidaicin Ruwa (LH8200)
25cm Madaidaicin Ruwa (LH8250)
Garanti
Wannan samfurin yana ba da garantin rayuwa na tsawon watanni 12 daga ranar da aka siyar da shi ga masu siye. Za mu ɗauki alhakin gazawar da ke haifar da lahani na abu ko masana'anta. Za mu gyara ko musanya ɓangarorin da ba su da lahani bisa ga shawararmu kawai don biyan buƙatun garanti.
Tabbacin ingancin bai haɗa da lalacewa ga sassa (blade), lalacewa ko lahani da lalacewa ta hanyar rashin kulawa ko kulawa ba, da lalacewar faɗuwar samfur. Amfani na yau da kullun da gyara mara izini bai kamata a rufe shi da garanti ba.
Ba a tsara wannan samfurin don ci gaba da dumama na dogon lokaci ba. Yin amfani da ba daidai ba zai haifar da lalacewa na filastik a gaban ƙarshen Wutar Wutar Lantarki saboda zafi mai zafi, wanda baya cikin iyakokin garanti.
Kulawa
Ana ba da shawarar sosai don aika samfurin zuwa kamfanin Lesite ko cibiyar gyarawa mai izini don dubawa da gyara ƙwararru.
· Abubuwan kayan gyara Lesite na asali ne kawai aka yarda.
